We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with the
problem of the shed getting too hot.

Grateful for any suggestions as to best how to keep it cooler in this warm
weather, please.

Trying to cut out holes in that tin sheeting would I guess be a difficult
task, and I've no idea if it would be of much help? Thanks for any advice.

On 04/07/2011 15:49, john brook wrote:
We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with the
problem of the shed getting too hot.

There is a limit to what you can do in a small space without any
airflow. Paradoxically your best bet might be to glue aluminium foil
onto the underside of the polystyrene slab. This slows down ingress of
solar heat by making it harder for the polystyrene to radiate energy.

Grateful for any suggestions as to best how to keep it cooler in this warm
weather, please.

The other trick is to make the exterior partially or entirely self
shading by having a second outer skin on battens. Ivy works pretty well
as it includes its own airconditioning and looks better than sheet steel.

Trying to cut out holes in that tin sheeting would I guess be a difficult
task, and I've no idea if it would be of much help? Thanks for any advice.

Letting the hottest air out the top and allowing cooler air in at ground
level will help a bit. You want a vent that lets hot air out but doesn't
allow rain to get in.

Regards,
Martin Brown

john brook wrote:
We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with the
problem of the shed getting too hot.

Grateful for any suggestions as to best how to keep it cooler in this warm
weather, please.

Trying to cut out holes in that tin sheeting would I guess be a difficult
task, and I've no idea if it would be of much help? Thanks for any advice.


Painting it white could be a good move, as could putting a secondary
roof above the first with an air gap between them. Also, maybe a small
solar powered fan in a window or door might help.

All of these work quite well on Land Rovers.

--
Tciao for Now!

John.

On Jul 4, 3:49*pm, "john brook" wrote:

Grateful for any suggestions as to best how to keep it cooler in this warm
weather, please.

Solar panel & 12V computer fan. A bit of battery helps (and a diode in
series with the solar panel), but you don't need smarts

On 04/07/2011 16:33, Janet wrote:
john brook wrote:
We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with the
problem of the shed getting too hot.

If you're working in or around it, leave the door open.
If you're not in the shed , does it matter how hot it is inside?

It doesn't do paints or garden pesticides much good to be excessively
hot or in strong sunlight. Oxidation and loss of solvent can occur.

Regards,
Martin Brown

On Mon, 04 Jul 2011 15:59:24 +0100, Martin Brown
wrote:

On 04/07/2011 15:49, john brook wrote:
We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with the
problem of the shed getting too hot.

There is a limit to what you can do in a small space without any
airflow. Paradoxically your best bet might be to glue aluminium foil
onto the underside of the polystyrene slab. This slows down ingress of
solar heat by making it harder for the polystyrene to radiate energy.

Grateful for any suggestions as to best how to keep it cooler in this warm
weather, please.

The other trick is to make the exterior partially or entirely self
shading by having a second outer skin on battens. Ivy works pretty well
as it includes its own airconditioning and looks better than sheet steel.

Trying to cut out holes in that tin sheeting would I guess be a difficult
task, and I've no idea if it would be of much help? Thanks for any advice.

Letting the hottest air out the top and allowing cooler air in at ground
level will help a bit. You want a vent that lets hot air out but doesn't
allow rain to get in.

Regards,
Martin Brown
Ridge vents and screened opening in the base.

john brook wrote:

We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help
with the problem of the shed getting too hot.

Grateful for any suggestions as to best how to keep it cooler in this
warm weather, please.

Trying to cut out holes in that tin sheeting would I guess be a
difficult task, and I've no idea if it would be of much help? Thanks
for any advice.

Maybe this sort of thing, couple near the roof line, a couple near the
floor .. ebay number 310329876456

Or a length of 130534194440 under the eaves etc

or a shed-load of drilled holes ..

--
Paul - xxx

On Mon, 4 Jul 2011 15:49:34 +0100, "john brook"
wrote:

We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with the
problem of the shed getting too hot.

Can you build a little cupola in the roof and add an attic fan?

Jim

"Martin Brown" wrote in message
...
On 04/07/2011 15:49, john brook wrote:
We have a sheet steel garden shed, and with any sun at all it gets
unbearably hot inside.

We put up polystryene slabs under the roof, but that was to stop the
condensation dripping down inside in the winter. It does not help with
the
problem of the shed getting too hot.

There is a limit to what you can do in a small space without any airflow.
Paradoxically your best bet might be to glue aluminium foil onto the
underside of the polystyrene slab. This slows down ingress of solar heat
by making it harder for the polystyrene to radiate energy.

Grateful for any suggestions as to best how to keep it cooler in this
warm
weather, please.

The other trick is to make the exterior partially or entirely self shading
by having a second outer skin on battens. Ivy works pretty well as it
includes its own airconditioning and looks better than sheet steel.

Trying to cut out holes in that tin sheeting would I guess be a difficult
task, and I've no idea if it would be of much help? Thanks for any
advice.

Letting the hottest air out the top and allowing cooler air in at ground
level will help a bit. You want a vent that lets hot air out but doesn't
allow rain to get in.

Regards,
Martin Brown

What about the obvious - a turbine / roof ventilator? The hot air is
enough to keep them moving when the wind is calm. It should be possible to
seal it off from inside the shack during the winter to trap any heat
indoors.

Good Luck.