Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Pump for cleaning out pond
I use a shop vac to suck the yuck off the bottom of my pond, but it fills up
in about nine seconds flat, and then I have to dump it and start over, a tedious and tiring process. What I want is a pump with a hose or wand on one end to suck mucky water from the bottom, and a hose on the other end to deposit it where I want it. I guess it might be a small version of the industrial pumps used to drain water from flooded areas. Does anyone know about such a thing? Thanks, Harriett |
#2
|
|||
|
|||
On Sun, 05 Sep 2004 16:18:22 GMT, "Harriett Wright"
wrote: ===I use a shop vac to suck the yuck off the bottom of my pond, but it fills up ===in about nine seconds flat, and then I have to dump it and start over, a ===tedious and tiring process. What I want is a pump with a hose or wand on ===one end to suck mucky water from the bottom, and a hose on the other end to ===deposit it where I want it. I guess it might be a small version of the ===industrial pumps used to drain water from flooded areas. Does anyone know ===about such a thing? === ===Thanks, ===Harriett === After reading the threads on sucking up mud etc out of the ponds bottom, I had an idea and tried my "Sand Sucker" A sand sucker is nothing more than an air powered vaccuum (uses air from an air compressor), used in foundries to suck loose sand out of molds, and in industry on a larger scale for emptying drums etc of the contents. My sand sucker has a 1 1/2" diam inlet tube (flexible) and discharges out through a cloth filter bag. I used a bag I fashioned from an old swiming pool skimmer net I had laying around, which wound up about as large as a 5 gal pail would be sizewise. It worked great. Water was actually forced out of the debri with the exhaust air during the process and only the sediment was retained in the bag, which was easy enough to empty. HOlding up the thing with 5 gal of damp wet muck is a job though, but perhaps an extension hose on it would wok so you cold place the bag on the ponds edge during cleanup. Visit my website: http://www.frugalmachinist.com Opinions expressed are those of my wife, I had no input whatsoever. Remove "nospam" from email addy. |
#3
|
|||
|
|||
Where on earth would a person find one of those things?
Harriett "Roy" wrote in message ... On Sun, 05 Sep 2004 16:18:22 GMT, "Harriett Wright" wrote: ===I use a shop vac to suck the yuck off the bottom of my pond, but it fills up ===in about nine seconds flat, and then I have to dump it and start over, a ===tedious and tiring process. What I want is a pump with a hose or wand on ===one end to suck mucky water from the bottom, and a hose on the other end to ===deposit it where I want it. I guess it might be a small version of the ===industrial pumps used to drain water from flooded areas. Does anyone know ===about such a thing? === ===Thanks, ===Harriett === After reading the threads on sucking up mud etc out of the ponds bottom, I had an idea and tried my "Sand Sucker" A sand sucker is nothing more than an air powered vaccuum (uses air from an air compressor), used in foundries to suck loose sand out of molds, and in industry on a larger scale for emptying drums etc of the contents. My sand sucker has a 1 1/2" diam inlet tube (flexible) and discharges out through a cloth filter bag. I used a bag I fashioned from an old swiming pool skimmer net I had laying around, which wound up about as large as a 5 gal pail would be sizewise. It worked great. Water was actually forced out of the debri with the exhaust air during the process and only the sediment was retained in the bag, which was easy enough to empty. HOlding up the thing with 5 gal of damp wet muck is a job though, but perhaps an extension hose on it would wok so you cold place the bag on the ponds edge during cleanup. Visit my website: http://www.frugalmachinist.com Opinions expressed are those of my wife, I had no input whatsoever. Remove "nospam" from email addy. |
#4
|
|||
|
|||
I use a swimming pool vacuum leaf trap, vacuum hose, and an 1800 or 2400 gph
mag drive pump and recirculate the water to the pond, or to the filter. You can see it at http://www.geocities.com/richtoybox/pondpage4.html. It works great, gets rocks, sand, oyster shell, leaves, some algae, and a lot of other debris. -- RichToyBox http://www.geocities.com/richtoybox/index.html "Harriett Wright" wrote in message ink.net... I use a shop vac to suck the yuck off the bottom of my pond, but it fills up in about nine seconds flat, and then I have to dump it and start over, a tedious and tiring process. What I want is a pump with a hose or wand on one end to suck mucky water from the bottom, and a hose on the other end to deposit it where I want it. I guess it might be a small version of the industrial pumps used to drain water from flooded areas. Does anyone know about such a thing? Thanks, Harriett |
#5
|
|||
|
|||
"Harriett Wright" wrote in message ink.net... I use a shop vac to suck the yuck off the bottom of my pond, but it fills up in about nine seconds flat, and then I have to dump it and start over, a tedious and tiring process. What I want is a pump with a hose or wand on one end to suck mucky water from the bottom, and a hose on the other end to deposit it where I want it. I guess it might be a small version of the industrial pumps used to drain water from flooded areas. Does anyone know about such a thing? Thanks, Harriett I clean my stepmothers pond with my shop vac which has a side outlet that can be opened.....I then just put the vac on it's side propped up and I never have to empty. I couldn't imagine having to shut it off and dumping it every few seconds. Dave |
#6
|
|||
|
|||
I like your thinking Wilson, seems so obvious ... good idea.
Harriett, don't know if you saw it already but there is a device for sale that works on a similar principle as Roy described i believe. This attaches to a garden hose, from which water flows backwards through a pipe, away from the pond creating a vacuum that draws out the pond water/waste. It does drop the level of the pond a bit: http://www.muckvac.com/ I got one on ebay for less than $50. It's not amazing but it does work. Good for silt or small stuff, larger leaves kind of choke it. It's much more effective without the the brush attachment. -mart "Wilson" wrote in message . com... I clean my stepmothers pond with my shop vac which has a side outlet that can be opened.....I then just put the vac on it's side propped up and I never have to empty. I couldn't imagine having to shut it off and dumping it every few seconds. Dave |
#7
|
|||
|
|||
What I wouldn't give for a stepson like you!
I never heard of a shop vac with a side outlet. Does this mean that I could cut a hole in the side of my shop vac and get some gaskety thingies at Home Depot or Ace Hardware and a long hose to attach to the hole? Then, after removing various sticks and twigs deposited in my pond by Frances, I could plug in my adapted shop vac, run the hose to a flower bed, and suck away. Would this work? If so it would be a boon when oak leaves, acorns, and oak flowers are falling faster than I can scoop them out (at least half the year). Harriett "Wilson" wrote in message . com... I clean my stepmothers pond with my shop vac which has a side outlet that can be opened.....I then just put the vac on it's side propped up and I never have to empty. I couldn't imagine having to shut it off and dumping it every few seconds. Dave |
#8
|
|||
|
|||
"Harriett Wright" wrote in message ink.net... What I wouldn't give for a stepson like you! I never heard of a shop vac with a side outlet. Does this mean that I could cut a hole in the side of my shop vac and get some gaskety thingies at Home Depot or Ace Hardware and a long hose to attach to the hole? Then, after removing various sticks and twigs deposited in my pond by Frances, I could plug in my adapted shop vac, run the hose to a flower bed, and suck away. Would this work? If so it would be a boon when oak leaves, acorns, and oak flowers are falling faster than I can scoop them out (at least half the year). Harriett Yes mine came with a bottom/side outlet and it is very handy....I'm guessing you could cut a quarter size hold in the vac a few inches from the bottom to accomplish the same thing then buy a rubber stopper to seal it up when you want. My stepmom appreciates my help on her pond, she has had some poor health lately so she has a hard time doing things.....she get's all misty eyed when I come over and help her I make fun of her when she does that. Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pump for cleaning out pond | Ponds | |||
Possible burned out pump? New pump suggestions... | Ponds | |||
Cleaning out the pond a bit today. | Ponds | |||
* FREE * Classified Ads for Vacuums ,Carpet Cleaning equipment, and Carpet Cleaning Vans and Vehicles | Lawns | |||
Pump in or Pump out? | Ponds |